Side Protector Plates

Great for slant radar speed cameras, this number plate protector allows your number plate to be read from straight on but not from the side. The special film decreases the visibility of the number plate as the angle increases until nothing is visible. This film will only work on slant radar, set-up on the side of the road.

Overhead Protector Plates

Ideal for fixed overhead radar speed cameras, this number plate protector is designed to be easily visible from the side and straight on, but from an overhead camera the plate is obscured. Great for those fixed overhead cameras.

We also have the Super Plate that is invisible from overhead and the side but clear from directly in front.

Our Number Plate Protectors are designed to defeat K and Ka photo radar cameras. Its simple design makes it quick and easy to install over your license plate, taking less than five minutes.

Installation is as simple as drilling mounting holes into the outer clear plastic matching the existing numberplate screws. Be careful not to drill too close to the film as you can permanently damage it if water or moisture gets in. Before drilling the mounting holes, be sure you have the plate positioned correctly as it can be installed the wrong way. Make sure that when you are directly in front of the protector, you can still clearly see through it. If you can not then you have it around the wrong way, and the plate will work in reverse, blocking anything in front of it but nothing else.

When driving behind a vehicle using license plate protectors, the entire alphanumeric characters of the license plate can easily be viewed. Patrol cars have no difficulty seeing the license plate numbers, however when a road side mounted camera attempts to photograph your license plate, the traffic camera can only see a white blur where the license plate numbers/letters are located.

The license plate protector is an inexpensive solution for photo radar traps it is available for both cars and motorbikes.

Check the local laws to ensure license plate protectors are acceptable.